NEC DS1000 User Guide

Feature Operation
30 ◆ Chapter 2: Features DS1000/2000 Cordless Telephone User Guide
Prime Line Preference
Intercom Prime Line Preference is enabled by default.
To place a call on your Prime Line:
1. Press TALK + Dial the call normally.
- To bypass your Prime Line, press another line key before pressing TALK.
Privacy Release Groups
Privacy Release Groups is disabled by default.
To join an outside call with a member of your Privacy Release Group:
1. Press the busy line key.
- Your display shows: CONFERENCE CALL
To prevent a member of your Privacy Release Group from joining your call:
1. Place or answer an outside call on a line key.
2. Press the line key.
3. Press the line key again to allow a co-worker to join in.
Programmable Function Keys
By default, keys 1-4 are line keys for outside lines 1-4. You can only set up cordless telephone function keys
from system programming.
Cordless Telephone Programmable Function Keys
Description Code BLF Operation
Undefined 00 - -
Loop Key, Switched 01 Of
f: Idle
On:
You are on a loop key call.
Slo
w Flash: Call is ringing the
loop key
Incoming: Press key to answer
outside call.
Outgoing:
Press key + Dial trunk
group (0-9) to place call.
Loop Key, Fixed 02 + Trunk
Group (90-98)
Of
f: Idle
On:
You are on a loop key call.
Slo
w Flash: Call is ringing the
loop key
Press key to place or answer out-
side call.
Line Key 03 + Trunk
number (e.g.,
1)
Of
f: Idle
On:
Line busy
Slo
w Flash: Line ringing
Press key to place or answer out-
side call.
Park Orbit Key 04 + System
Orbit (60-69)
Off: Park Orbit idle.
On: Call parked in orbit by a co-
worker
Fast Flash: Has a call you
parked.
Press key to Park or retrieve call.

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English