Electra Elite IPK II Document Revision 1
General Description Manual 2 - 57
customer calls in, the dispatcher just lifts the handset get their call. (Incoming
Prime Line Preference can optionally seize an idle line appearance.)
Private Line
A Private Line is a trunk reserved for a multiline terminal for placing and answering
calls. A user with a Private Line always knows when important calls are for them.
Additionally, the user has their own trunk for placing calls that is not available to
others in the system.
Programmable Function Keys
Each multiline terminal has Programmable Function Keys. Programmable Function
Keys simplify placing calls, answering calls and using certain features. You can
customize the function of a multiline terminal’s programmable keys from each
multiline terminal. Depending on your telephone style, you can have either 4, 8, 16 or
32 Programmable Function keys.
Programming from a Multiline Terminal
System Programming can be performed from any display multiline terminal. Most
programming changes become effective immediately. Other programming changes
become effective after the data is backed up from temporary memory to permanent
memory.
Pulse to Tone Conversion
An extension can use Pulse to Tone Conversion on trunk calls. Pulse to Tone
Conversion lets a user change their extension’s dialing mode while placing a call. For
systems in a Dial Pulse area, this permits users to access dial-up OCCs (such as
MCI) from their DP area. The user can, for example:
J
Place a call to an OCC over a DP trunk.
J
Depending on programming:
Manually implement Pulse to Tone Conversion
- OR -
Wait 10 seconds.
Dial the OCC security code and desired number. The system dials the digits after the
conversion as DTMF.
Quick Transfer to Voice Mail
A station user transferring a call can transfer the call to the called party voice mail box
after an internal station number is dialed while performing a screened transfer, or
during intercom calls.
To Next Page
Loading...
