Electra Elite Issue 3
SAT End-User Manual 2 - 13
Basic
The Basic pulldown menu allows access to basic end-user programming
items.
Some menu items may be disabled if the appropriate hardware is not assigned,
or a dependent data item is not set.
Terminals
This option allows the user to assign the terminals to the system. Several
selections are available with this option.
System Wide
Station Base
Multiline
DSS/BLF
CO/PBX Trunks
This option allows user to program system data related to trunk
assignments.
One selection is available with the System-Wide option.
Figure 2-6 Basic Menu
To Next Page
Loading...
