Issue 3 Electra Elite
1 - 2 Introduction
Internal Zone Paging (Meet-Me)
Music On Hold (MOH)
Night Transfer
Off-Hook Ringing
Ringing Line Preference
Speed Dial Station
Speed Dial Stored Characters
Speed Dial System
Voice Prompt Selection
It is no longer necessary to call an authorized NEC technician to program
these basic system features. Meeting the requirements of a company’s
day-to-day communications needs just got easier!
Simply connect a SAT End-User PC to the KTS via direct or remote
connection, make the programming changes in SAT, upload the changes
from SAT to the KTS, and exit. It’s that easy!
SAT End-User runs on a PC with Windows 95/98, and connects to
the Electra Elite KTS either directly (using the serial cable included
or remotely using a modem.
• Direct Connection - this method is used when the user is at the
KTS location.
• Remote Connection - this method is used for convenient system
programming when the KTS is located at a remote site.
To Next Page
Loading...
Need help?
General