4-12 Linux Setup
7. Check the status.
>vndctl status
Dual LAN card configuration has completed when the screen displays the status is “UP”,
and the link is “LINK” (with LAN cable connected) as shown above.
-Virtual Network Status-
virtual status ipconf slot real(s)
ha0 OKAY yes 7 *epro01.06 epro40.06
slot real status link
1 left -
right -
2 left -
right -
3 left -
right -
4 left gb01.03.0 -
right gb40.03.0 -
5 left -
right -
6 left -
right -
7 left epro01.06 UP LINK
ri
ht e
ro40.06 UP LINK
8. Execute the following command to check whether the settings such as IP addresses are set
correctly.
>vndctl ipconf 7
DEVICE=ha0
ONBOOT=yes
BOOTPRONTO=static
IPADDR=192.168.99.10
NETMASK=255.255.255.0
GATEWAY=192.168.99.1
To Next Page
Loading...
