4-14 Linux Setup
Disk management tool (ftdiskadm)
You can check the status of the integrated SCSI disk and set the RAID configuration safely by using
disk management tool (ftdiskadm).
By using ftdiskadm, you can;
Check the status of the entire built-in disks
Check the status of RAID of the built-in disks
Recover RAID of the built-in disk
Extend the built-in disk
Detach the built-in disk
<Example>
# ftdiskadm
Command action
1 => SCSI
2 => RAID
3 => Environment
9 Quit
Command: 2
Command action
1 Status(Raid)
2 Status(All Disks)
3 Repair Disk
4 New Disks
5 Remove Half Disk
6 Remove Full Disks
9 <= RETURN
Command:
...
To Next Page
Loading...
