1. System Utilities
Express5800/R120h-1E, R120h-2E Maintenance Guide
126
Chapter 2 Useful Features
(4)
Setting Options Menu
When you select System Configuration > BMC Configuration Utility > Setting Options from the System
Utilities, the Setting Options menu appears.
For details about the options, see the table below.
Option
Parameter Description
BMC Functionality [Enabled]
Disabled
You can enable or disable BMC functionality.
BMC Configuration Utility [Enabled]
Disabled
When BMC Configuration Utility is disabled, BMC
Configuration Utility will not be part of the System
Configuration Utility.
Require user login and
configuration privilege for
BMC Configuration
[Disabled]
Enabled
This setting determines whether a user-credential
prompt is displayed when a user accesses BMC
configuration utility.
Show BMC IP Address during
POST
[Enabled]
Disabled
Show BMC IP Address during POST.
Local Users [Enabled]
Disabled
Enables or disables local users.
Serial CLI Status [Enabled-Authentication
Required]
Enabled-No Authentication
required
Disabled
Sets the serial CLI status.
Serial CLI Speed(bits/second) [9600]
19200
57600
115200
Sets the serial CLI speed (bits/s).
BMC Web Interface [Enabled]
Disabled
Set BMC web interface to enable or disable.
[ ]: Default setting
(5)
About Menu
When you select System Configuration > BMC Configuration Utility > About from the System Utilities, the
About menu appears.
For details about the options, see the table below.
Option Parameter Description
Firmware Date (Display only) Shows the date of firmware revision.
Firmware Version (Display only) Shows the firmware version.
Hardware Version (Display only) Shows the software version.
BMC CPLD Version (Display only) Shows the CPLD version.
Host CPLD Version (Display only) Shows the host CPLD version.
PCIe BUS (Display only) Shows the PCIe BUS to which the processor is
connected.
Device (Display only) Shows the device number assigned to the BMC
within the PCIe bus.
To Next Page
Loading...
