7. Resetting and Clearing the Server
Express5800/R120h-1E, R120h-2E Maintenance Guide
61
Chapter 1 Maintenance
7.3
Initialization of System Configuration Information
Description on the Features of System Maintenance Switch
7.3.1
Here we describe the features of system maintenance switch of the server.
Table: Detailed Features of System Maintenance Switch
Position Default Configuration Features
SW1 *1, *5 OFF
OFF Set to OFF usually.
ON Set the security of iLO5 to disabled.
SW2 OFF Reserved
－
SW3 OFF Reserved
－
SW4 OFF Reserved
－
SW5 *2, 5 OFF
OFF
Set to OFF usually.
ON
Clears power-on password and administrator password.
SW6 *3, *5 OFF
OFF Set to OFF usually.
ON Set the system configuration back to the default values. *4
SW7 OFF
Reserved
－
SW8 OFF
Reserved
－
SW9 OFF
Reserved
－
SW10 OFF
Reserved
－
SW11 OFF
Reserved
－
SW12 OFF
Reserved
－
Important
Do not change the system maintenance switch that says “Reserved” unless
it is instructed by the document. It may cause the trouble or malfunction of
device.
*1 Set SW1 to ON in the following cases.
・When the passwords of all the users which administrator authority is given of iLO5 have become unknown
・When you change the feature of iLO5 from disabled to enabled
*2 Regarding the operation procedure of SW5, see Chapter 1 (7.3.4 Clearing a Password) of this document.
*3 Regarding the operation procedure of SW6, see Chapter 1 (7.3.3 Set the System Configuration Back to
Default Values).
*4 Default values may be different from the factory preset.
*5 When you set SW1, SW5, and SW6 to ON at the same time, boot with the backup ROM.
To Next Page
Loading...
