1. System Utilities
Express5800/R120h-1E, R120h-2E Maintenance Guide
128
Chapter 2 Useful Features
(a) NIC Configuration Menu
When you select System Configuration > (Embedded LOM) > NIC Configuration from the System Utilities,
the (Embedded LOM) menu appears.
For details about the options, see the table below.
Option Parameter Description
Link Speed
(Display only)
Specifies the port speed used for the selected
boot protocol.
Wake On LAN [Enabled]
Disabled
Enables power on of the system via LAN. Note
that configuring Wake on LAN in the operating
system does not change the value of this setting,
but does override the behavior of Wake on LAN in
OS controlled power states.
[ ]: Default setting
One-Time Boot
1.2.5
When you select One-Time Boot from the System Utilities or press the <F11> key on the POST screen, the
One-Time Boot menu appears.
You can select the UEFI boot device using the One-Time Boot menu.
Selecting this option does not change any predefined Boot Order settings.
The options are as below.
Option Parameter Description
OS boot manager such as
Windows Boot Manager
-
Boots the installed OS.
Generic USB Boot
-
Boots from the installed USB boot device.
Provides the placeholder of the USB device
bootable with UEFI.
By setting the boot order of this option, you can
retain the boot order when using the USB
device that may be installed in the future.
Embedded LOM
-
Boots from the boot device connected to
Embedded LOM.
Embedded UEFI Shell - Boots from Embedded UEFI Shell.
Embedded SATA Port
-
Boots from the boot device connected to
Embedded SATA Port.
Run the UEFI application from
the file system
-
Selects the UEFI applications that run from the
file system.
Shows all the FAT file systems available in the
system.
Legacy BIOS One-Time Boot
Menu
-
Launches Legacy BIOS One-Time Boot
Menu.
To Next Page
Loading...
