NEC Express5800 Series - System Information

1. System Utilities
Express5800/R120h-1E, R120h-2E Maintenance Guide
130
Chapter 2 Useful Features
System Information
1.2.7
When you select System Information from the System Utilities, the System Information menu appears.
For details about the options, see the table below.
Option Parameter Description
Summary
-
Displays a summary of System Information.
Processor Information
-
Displays detailed information about the CPU(s) on the
system.
Memory Information
-
Displays detailed information about the memory on
the system.
PCIe Device Information
-
Displays detailed information about the PCIe Devices
found in the system.
Firmware Information
-
Displays detailed information about the firmware
images reported by the devices in the system.
Export System Information to file
-
Exports the System Information to a file.
(1)
Summary Menu
When you select System Information > Summary from the System Utilities, the Summary menu appears.
For details about the options, see the table below.
Option Parameter Description
System Name
(Display only) Displays the system name and generation.
Serial Number
(Display only) Displays the system serial number.
Product ID
(Display only) Displays the Part Number.
System ROM
(Display only) Displays the System ROM version and date.
Redundant System ROM
(Display only) Displays the Redundant System ROM version and
date.
Power Management Controller
FW Version
(Display only) Shows the firmware version of the power
management controller.
User Defaults
(Display only) Displays whether user default settings are enabled.
Boot Mode
(Display only) Displays the Boot Mode setting.
Total Installed System Memory
(Display only) Displays the total memory installed in the system.
Total Available System
Memory
(Display only) Displays the amount of configured system memory
available for use in the system.
Total Installed Persistent
Memory
(Display only) Displays the total Persistent memory installed in the
system.
Total Available Persistent
Memory
(Display only) Displays the amount of configured Persistent memory
available for use in the system.
Processor 1
(Display only) Displays processor information.
Processor 2
(Display only) Displays processor information.
iLO Firmware Version
(Display only) Shows the iLO firmware version.
iLO IPv4 address
(Display only) Shows the iLO IPv4 address.
iLO IPv6 address
(Display only) Shows the iLO IPv6 address.
Network Devices
(Display only)
-
Embedded LOM x Port x
(Display only) Shows the MAC address of the selected network
device.