1. System Utilities
Express5800/R120h-1E, R120h-2E Maintenance Guide
134
Chapter 2 Useful Features
(4)
PCIe Device Information Menu
When you select System Information > System Information > PCIe Device Information from the System
Utilities, the PCIe Device Information menu appears.
For details about the options, see the table below.
Option Parameter Description
Location
(Display only) Shows the physical position (of this PCIe device)
within the system.
Slot Description
(Display only)
Shows details of this PCIe slot.
UEFI Device Path
(Display only) Shows that logical path to the device that was
determined by the UEFI BIOS firmware.
UEFI Structured Name
(Display only) Shows that logical name of the device that was
determined by the UEFI BIOS firmware.
Populated
(Display only) Specifies but shows whether a device is installed to
this PCIe slot.
Enabled
(Display only)
Specifies whether this PCIe slot is enabled.
Device Name
(Display only)
Shows the device name.
Device Type
(Display only)
Shows the device type.
PCIe Address
(Display only) Shows the logical address of the PCIe device within
the PCIe topology of the system.
PCI Vendor ID
(Display only) Shows the hexadecimal number that signifies the
16-bit device vendor ID.
PCIe Device ID
(Display only) Shows the 16-bit device ID assigned with a
hexadecimal number.
PCI Sub Vendor ID
(Display only) Shows the 16-bit ID (hexadecimal number) with
which the original design of the device may have
been changed.
PCI Sub Device ID
(Display only) Shows the PCI sub device ID (hexadecimal
number).
PCI Class Code
(Display only) Shows the general type of this PCIe device.
For
details, see the PCI specifications.
PCI Sub Class Code
(Display only) Shows a specific type of this PCIe device.
For
details, see the PCI specifications.
Firmware
(Display only) Shows the version of the firmware reported by the
device. Note that it reports that the device has
multiple firmware revisions.
To Next Page
Loading...
