NEC Express5800 Series - Page 211

1. IML Error Message
Express5800/R120h-1E, R120h-2E Maintenance Guide
211
Chapter 3 Appendix
Class
Error
code
Error message Action
UEFI 3011
MemBIST MEMTEST: UnCorrectable
Memory Error found at CPU %1 DIMM %2
Rank %3 - UC Count %4
Contact your sales representative.
UEFI 3012
MemBIST MEMTEST: Correctable Memory
Error found at CPU %1 DIMM %2 Rank %3
Strobe %4 - CE Count %5
Contact your sales representative.
UEFI 3013
Processor Built-In Self-Test (BIST) Failure.
Processor %1, Error Code = 0x%2.
Contact your sales representative.
UEFI 3016
Memory Configuration Error - No memory
is available. If DIMMs are installed, verify
that the DIMMs are installed properly.
-System Halted!
Referring to the user’s guide, change the mounting
positions or number of DIMM.
In case a problem is not resolved, contact your sales
representative.
UEFI 3017
Server Platform Services Authentication
Failure - The Server Platform Services
(SPS) firmware image failed authentication
and may be compromised. -System Halted!
Update the Server Platform Services (SPS) firmware. If
the problem persists, contact your sales representative.
UEFI 3018
Server Platform Services Authentication
Failure - The Server Platform Services
(SPS) firmware image could not be
authenticated because the image is out of
date.
Update the Server Platform Services (SPS) firmware. If
the problem persists, contact your sales representative.
UEFI 3019
Server Platform Services Firmware in
Recovery Mode. SPS firmware image is
corrupted. -System Halted!
Update the Server Platform Services (SPS) firmware. If
the problem persists, contact your sales representative.