NEC Express5800 Series - Page 213

1. IML Error Message
Express5800/R120h-1E, R120h-2E Maintenance Guide
213
Chapter 3 Appendix
Class
Error
code
Error message Action
Power 36 System Power Supplies Not Redundant Contact your sales representative.
Power 37
External Chassis Power Supplies Not
Redundant (Chassis %1)
Contact your sales representative.
Power 38
%1 Storage System Power Supplies Not
Redundant (Chassis %2 Slot %3)
Contact your sales representative.
Power 3A
%1 Power Supplies Not Redundant (Enclosure
Serial Number %2)
Contact your sales representative.
Power 3B
%1 Power Supplies Not Redundant (Enclosure
Address %2)
Action is not necessary.
Power 3C
System Power Fault Detected (XR: %1 %2
MID: %3)
Action is not necessary.
Power 3D
System Power Fault Detected (XR: %1 %2
MID: %3)
Contact your sales representative.
Power 3E
Smart Storage Battery failure (Battery %1,
service information: %2).
Contact your sales representative.
Power 3F
Smart Storage Battery did not charge at the
expected rate, indicating a faulty battery
(Battery %1, service information: 0x03)
Contact your sales representative.
Power 40
Smart Storage Battery disabled due to high
ambient temperature, will be re-enabled when
temp is lowered (Battery %1, service
information: 0x04)
Contact your sales representative.
Power 41
Smart Storage Battery discharged to below
minimum voltage, resulting in the inability of
the battery to recharge properly (Battery %1,
service information: 0x05)
Contact your sales representative.
Power 42
Smart Storage Battery has exceeded the
maximum amount of devices supported
(Battery %1, service information: 0x07)
Contact your sales representative.
Power 43 Smart Storage Battery failure (Battery %1) Contact your sales representative.
Power 44
%1 Storage Enclosure Power Supply Failure
(Power Supply %2, Box %3, %4)
Contact your sales representative.
Power 52 System Power Supply: %1 (Power Supply %2) Contact your sales representative.
Power 53
Power redundancy loss warning: server
power: %1W exceeded the redundant power
threshold: %2W
Contact your sales representative.
Power 54 System Power Supply: %1 (Power Supply %2) Contact your sales representative.