6. Windows System Recovery
Express5800/R120h-1E, R120h-2E Maintenance Guide
59
Chapter 1 Maintenance
8. After setting Starter Pack DVD to the drive, run the following command to load the driver:
("D:" means a drive name of DVD and this name depends on your system)
For on-board RAID controller:
Tips
When the server configures an on-board RAID controller and an internal optical
disc drive, load the driver from a removable media. ("E:" means a drive name of
removable media and this name depends on your system)
drvload E:\sw_raid1_driver\SmartDQ.inf
For RAID controller (N8103-189/190/191/192/193/194/195/201)
Tips
The volume label for each drive can be checked from the display result of the dir
command.
Example: dir C:\
9. Exit the command prompt.
The driver installation is completed.
drvload D:\software\002\drivers\sw_raid1_driver\SmartDQ.inf
drvload D:\software\002\drivers\dac1_driver\SmartPqi.inf
To Next Page
Loading...
