1. System Utilities
Express5800/R120h-1E, R120h-2E Maintenance Guide
69
Chapter 2 Useful Features
For details about the options, see the table below.
Option Parameter Description
System Configuration
-
Displays the System Configuration menu.
You can
use this option to set up the System Utilities, the other
system devices, and the option card devices.
One-Time Boot
-
Displays the One-Time Boot menu. Use this option to
boot the system only one time from a device not
dependent on the predefined boot order. Selecting a
device through One-Time Boot menu does not change
the predefined boot order.
Embedded Application
-
Displays the [Embedded Application] menu. By using
this option, you can update Embedded UEFI Shell,
[EXPRESSBUILDER], and firmware or display
[Embedded Diagnostics], [Integrated Management
Log], and [Active Health System Log].
System Information
-
Displays the System Information menu. Use this
menu to view system information including the system
name, system ROM version, date, processor
information, and memory information.
System Health
-
Displays the System Health menu.
Use this option to
display the health status of all the devices within this
server. When an error is detected during POST, <F2>
View Information/Errors appears. This starts up by
pressing the <F2> key.
Exit and resume system boot
-
Exits the System Utilities and continues with the usual
boot process.
Reboot the System
-
Exits the System Utilities and restart the BIOS.
Select Language [English]
Simplified Chinese
Japanese
Changes the current language of the system.
Setup Browser Selection GUI
Text
[Auto]
Selects the setup browser to use. In the [Auto] mode,
use [Text] when the user enters the System Utilities via
the serial console or [GUI] when the user enters it via
the IRC or physical terminal.
[ ]: Default setting
To Next Page
Loading...
