1. System Utilities
Express5800/R120h-1E, R120h-2E Maintenance Guide
94
Chapter 2 Useful Features
Option
Parameter Description
Mutual CHAP Secret String of 12 to 16
alphanumeric characters
The password needed for Mutual (reverse) CHAP
authentication (from the target to the initiator).The
password must be between 12 and 16 characters
long. This is applicable only when the authentication
type is set to CHAP and the CHAP Type is set to
Mutual.
[ ]: Default setting
(d) VLAN Configuration Menu
When you select System Configuration > BIOS/Platform Configuration (RBSU) > Network Options > VLAN
Configuration from the System Utilities, the VLAN Configuration menu appears.
For details about the options, see the table below.
Option
Parameter Description
VLAN Control Enabled
[Disabled]
Use this option to enable or disable VLAN tagging
on all enabled network interfaces.
VLAN ID [0]-4094 Use this option to set the global VLAN ID for all
enabled network interfaces. Valid values are 0 to
4094.A value of 0 sets the device to send untagged
frames.
VLAN Priority [0]-7 Use this option to set the priority for the VLAN
tagged frames. Valid values are 0 to 7.
[ ]: Default setting
To Next Page
Loading...
