NEC Express5800 Series Software Installation

NEC Express5800/120Lh Operation Manual for Microsoft®Windows Server™ 2003 x64 Editions
4


 Creating the Windows Server 2003 x64 Edition OEM-DISK for
EXPRESSBUILDER
The installation requires a floppy disk called the Windows Server 2003 x64 Edition
OEM-DISK for EXPRESSBUILDER. Follow the creation steps below.
TIPS
When the Windows Server 2003 x64 Edition OEM-DISK for
EXPRESSBUILDER has already been created for the
device, it is unnecessary to create a new one.
Follow the steps below to create the disk:
(1) Prepare one empty 3.5-inch floppy disk formatted to the 1.44MB format.
(2) Start the operating system.
(3) Download the NEC difference module.
(See "Downloading the NEC Difference Module".)
(4) Set the floppy disk in the floppy disk drive.
(5) Copy all files in the following folder to the floppy disk:
<storage-destination-folder-name>¥WINNT¥OEMFD¥W2K3AMD¥FD1
Completion of the copy operation completes the creation of the Windows
Server 2003 x64 Edition OEM-DISK for EXPRESSBUILDER.
Write-protect the created Windows Server 2003 x64 Edition OEM-DISK for
EXPRESSBUILDER, attach a label to the floppy disk, and keep it in a safe place.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)