NEC LT265 - DVD Player Connectivity; Component and Video Output Connection

7. Setting the LAN Setting of Projector
25
Setting the LAN Setting of Projector
7. Setting the LAN Setting of Projector
Preparation:
Turn on the power to the projector and project images to the screen.
It is not necessary to select the signals.
For how to turn on/off the power to the projector and how to operate the buttons and
remote control of the projector, refer to "1. Introduction", "2. Installation and
Connections", and "3. Projecting an Image (Basic Operation)" of "User's Manual"
included in the User's Manual CD-ROM.
Press the button.
The on-screen menu will be displayed.
Use the button to select the Setup submenu.
Press the button.
The "Basic" tab will be highlighted.
Press the button three times to highlight the "Installation" tab.
7-1. Displaying On-Screen Menu (LAN Mode)
1
Highlight
2
3
4