2. Desktop Control Utility 1.0
54
2. Desktop Control Utility 1.0
For the major functions of the Desktop Control Utility 1.0, refer to "1. What You Can Do with
User Supportware 2" in the chapter "Preparation" ( page 8).
Operation on personal computer
Click Windows [Start] → [All Programs] → [NEC Projector User Supportware 2]
→ [Desktop Control Utility 1.0] → [Desktop Control], in that order.
The "Selection Of Network Connections" window will be displayed.
A list of the network equipment connected to your personal computer will be displayed.
Select the network equipment that is to be used and click [OK].
The "Startup password settings" window will be displayed.
Screen when Desktop Control Screen if starting password has
Utility 1.0 is started first time already been set
2-1. Manipulating Desktop Screen by Using Projector
1
2
Important
• Be sure to write down the starting password in case you forget it.
• The starting password must be input each time Desktop Control Utility 1.0 is
started.
• Should you forget the starting password, reinstall the Desktop Control Utility
1.0.
To Next Page
Loading...
