2. Desktop Control Utility 1.0
55
Desktop Control Utility 1.0
Operating the projector (connecting personal computer)
Input the starting password of Desktop Control Utility 1.0, and click [OK].
The "Current password" window will be displayed.
Write down the character string displayed in the password field.
Write down "NDKE" in the screen example of step .
Click [OK].
Desktop Control Utility 1.0 will be started.
Move to the room where the projector is installed, with the paper on which you have written down
the password in step .
Connect a USB mouse that is commercially available to the projector.
Turn on the power to the projector.
Set the LAN setting of the projector in advance.
3
The character string displayed in the password field varies each time Desktop Control
Utility 1.0 is started.
4
3
5
4
1
PC CARD
R AUDIO IN L
AC IN
VIDEO IN
AUDIO OUT
S-VIDEO IN
PC CONTROL
MONITOR OUT
COMPUTER 2 IN
AUDIO IN
USBLAN
COMPUTER 1 IN
USB
2
To Next Page
Loading...
