1. Image Express Utility 2.0
45
Image Express Utility 2.0
"
1. Image Express Utility 2.0
This section explains the following three cases as examples of operating Image Express
Utility 2.0.
(1) Transferring images to the projector
(2) Holding a conference
(3) Participating in a conference
For the major functions of Image Express Utility 2.0, refer to "1. What You Can Do with User
Supportware 2" in the chapter "Preparation" ( page 6).
Connecting projector
Turn on the power to the projector for which LAN has been set.
Click Windows [Start] → [All Programs] → [NEC Projector User Supportware 2]
→ [Image Express Utility 2.0] → [Presenter], in that order.
The "Selection Of Network Connections" window will be displayed.
A list of the network equipment connected to your personal computer will be displayed.
Select the network equipment that is to be used and click [OK].
If network equipment of wireless LAN is selected, the confirmation window for "Easy Connection
settings" will be displayed.
If wired LAN is selected, proceed to step .
1-1. Sending Images to Projector
1
2
3
5
To Next Page
Loading...
