5. PC Control Utility 3.0
70
Connecting projector
Press the button four times to highlight the "LAN PC Card" tab.
If the wired LAN is used, select the "LAN Built-in" tab.
Write down the IP address displayed on the screen.
In this example, the IP address is "192.168.100.10".
Press the button twice.
The on-screen menu will be closed.
Click Windows [Start] → [All Programs] → [NEC Projector User Supportware 2]
→ [PC Control Utility 3.0] → [PC Control Utility 3.0], in that order.
PC Control Utility 3.0 will be started and a window confirming connection with the project will be
displayed.
If the personal computer has been previously connected to a projector, the window for
connecting the projector is closed and then the tool bar is displayed ( page 72).
5
6
7
1
Click
2
To Next Page
Loading...
