7. Setting the LAN Setting of Projector
30
Input "DNS Configuration".
Set the IP address of the DNS server of the network to which the projector is connected.
The method of inputting is the same as that of the "IP Address" field.
Reconnect the network.
<1> When all the above items have been input or set, use the button
to highlight "Reconnect" and press the button.
Finalize the setting.
<1> Use the button to highlight [OK] and press the but-
ton.
The setting will be stored in the memory of the projector.
6
7
8
To Next Page
Loading...
