7. Setting the LAN Setting of Projector
35
Setting the LAN Setting of Projector
Select "Mode" (if necessary).
The communication mode of the SSID selected in "Site Survey" are automatically selected.
The settings can be changed by moving the highlight to the "Mode" field and pressing the
button.
• "Infrastructure" ••••••••••••• This is selected if communication is performed with two or more
devices connected by wired or wireless LAN via an access point.
• "802.11 Ad Hoc"••••••••••• This is selected to perform peer-to-peer communication between
the projector and a personal computer by using only wireless
LAN.
Example of connection when Example of connection when
"Mode" is "Infrastructure" "Mode" is "802.11 Ad Hoc"
Example of setting 2
Select "WEP" page (if necessary).
Proceed to step if WEP is not set.
<1> Use the button to select the "Network Type" tab, and press the
button to highlight the "WEP" tab.
The "WEP" page will be displayed.
8
Wired LAN
Access
point
9
13
To Next Page
Loading...
