NEC LT265 - Audio, Laser Pointer, and Optimization; Image Optimization and Audio Control; Automatic RGB Image Optimization; Volume Adjustment Method

8. Setting the LAN Setting of Personal Computer
40
Select (click) SSID of the projector to be connected, from the list of [Available
networks], and click [Configure].
•
In this example, SSID of the project is set to "NECPJ" ( page 35). Select (click) "NECPJ"
from the list.
The configuration window of "NECPJ" will be displayed.
Click [OK].
The property window for wireless network connections will be displayed again.
5
6
Click
6
Click
5-1
Click
5-2
Click
4