NEC LT265 - Projector Shutdown and Storage Procedures; Safe Power-Off and Cooling Process; Post-Use Procedures and Storage

8. Setting the LAN Setting of Personal Computer
42
Click [Use the following IP address:], and input [IP address] and [Subnet
mask].
•
If, for example, the [IP address] and [Subnet mask] of the projector are set as shown in
"Example of setting 1" on page 33, set the personal computer as shown below.
Click [OK].
The property window for the wireless network connection will be displayed again.
Click [Close].
This completes the Ad Hoc connection of wireless LAN on the personal computer (Windows
XP).
9
• Example of setting the IP address and subnet Mask
Projector ( page 33) Personal computer (Screen Below)
IP address 192.168.100.010 192.168.100.20
Subnet mask 255.255.255.000 255.255.255.0
10
11
Click
9-1
Input
9-2