4. Viewer PPT Converter 3.0
68
Projecting image by using viewer function of projector
Turn on the power to the projector.
Set the flash memory card to which the converted PowerPoint file has been out-
put to the projector ( page 23).
Press the button of the remote control.
The input source of the projector will change to "Viewer" and the image output to the flash
memory card will be projected.
• To use the button of the projector, press the button and select "Viewer".
• For the operation of the "Viewer", refer to the User's Manual (in User's Manual CD-ROM).
• To end the "Viewer", select another input signal by pressing the button of
the remote control.
When the viewer ends, remove the flash memory card from the projector
( page 24).
1
2
If the wireless LAN card has already been set to the projector, turn off the power to
the projector once, and remove the wireless LAN card. Then set the flash memory
card to the projector, and turn on the power to the projector.
3
COMPUTER 1
4
Do not remove the flash memory card while the PC card access indicator lights.
Otherwise, the flash memory card may be damaged.
To Next Page
Loading...
