NEC MultiSync CB651Q - OSD (On-Screen-Display) Controls; General Setting

English-25
English
Swipe your nger up from the bottom of the screen or press the input button on the remote control or launcher interface to
access the OSD Menu.
OSD Settings
General setting
Adjustment Item Problem / Option
Input*
1
Direct
OPTION Select the OPTION input.
Home Select the Home input.
HDMI1 Select the HDMI1 input.
HDMI2 Select the HDMI2 input.
HDMI3 Select the HDMI3 input.
VGA Select the VGA input.
Volume
Direct
Too soft Increase or decrease output volume level.
Too loud
Brightness
Direct
Brightness of backlight is reduced.
*1 The switching of the signal input take a few seconds.
Click the button in the upper right corner to enter the settings for Audio, screen, Display, and Adjust. see page 26,
page 27, page 28, and page 29.
OSD (On-Screen-Display) Controls