NEC MultiSync CB651Q - Page 63

English-61
English
Firewall and Proxy
Firewall
● For remote connections, receiver and clients need to be able to access the Internet through these ports;
TCP 80
TCP 443
UDP 53
● For local connections (i.e. clients on the same network or connecting through Mosaic Connect Access Point) the
following ports are used;
TCP 1-65535 (It will be selected from available ones)
UDP 1025 – 65535
TCP 4700, 7000, 7100 (For Airplay connections)
If there is Layer 7 ltering or proxy with protocol ltering on these ports then the following protocols will need to be allowed;
• HTTP
• HTTPS
• DTLS
• XMPP
• Bonjour protocols
• SRTP
• DNS
• STUN
• TURN
• ICE
Our SaaS provides services at the following FQDNs;
• netcheck.connectmosaic.com
• api.connectmosaic.com
• xmpp.connectmosaic.com
• stt01.connectmosaic.com
• stt02.connectmosaic.com
• stt03.connectmosaic.com
• stt04.connectmosaic.com
• stt05.connectmosaic.com
Proxy support
The Mosaic Connect Windows/OSX software support proxy conguration. The following proxy types are supported.
● HTTP Proxy (with or without authentication)
● SOCKS 5 (with or without authentication)
● Proxy with Auto-Conguration File (PAC). Windows only.
● System proxy. Windows only.