5-11
Note 1:
According to the designation of sync signals and the setting of each inspection mode, the analog outputs
(BNC) of the signal generator shall be connected as specified below. (Except the cases when otherwise
specified)
1) SEPARATE: R/G/B CONNECTION, HS ←→ H, VS ←→ V, CS not connected
2) COMPOSITE: R/G/B CONNECTION, CS ←→ H No connections for HS and VS
3) SYNC ON GREEN: R/G/B CONNECTION, No connections for HS, VS, and CS
Note 2:
Option 2 Screen
To Next Page
Loading...
Need help?
General