5-19
No Content
FLC48SXC8V
Specification (FJ)
Remarks
Clear mura (with clear border)
By 8% ND filter
Unclear mura (with unclear
border)
By 8% ND filter
9 Mura (mm)
Light or dark hor. & Vertical
bands
By 8% ND filter
(1)Test pattern : Full black/full
white/50% gray
(2)Invisible, (Note 3, 4)
10 White dot spots
By 8% ND filter
Invisible
11 RGB segment defect It is not allowed
12 Vertical or horizontal line(s) defect It is not allowed
13 Light bands defect It is not allowed
14 Over shoot (RGB) It is not allowed
15 Tab defect (Black strip with no image) It is not allowed
16 Block noise It is not allowed
17 White or black screen (no video) It is not allowed
18 Screen break It is not allowed
19 Panel noise (Twinkling) It is not allowed
20 Newton ring number N= 0
21 Rubbing mark Rubbingless
22 Mottling (Non-uniformity or mura) By 8% ND filter Invisible; (Note 3, 4)
23 Dim line (Vth shift line) By 8% ND filter Invisible; (Note 3, 4)
24 Line defective N=0 Pattern: Black, white
25 Fungus (mm) By 8% ND filter Invisible; Pattern: 50% gray
Note 1 : Detailed definition of 2 dots adjacent is as follows.
Dot defect distance category is not applied to the dot defects categorized in 2 dots adjacent.
RGBRGB
RGBRGB
RGBRGB
RGBRGB
Note 2 : Definition of Defective distance is as follows. Defective distance is specified among bright dots and
among dark dots each, as bright dot and dark dot are not seen at the same screen.
Note 3 : How to use 8% ND filter.
A: Measurement
(1) The distance between LCD with ND filter : 3 cm
(2) The viewing distance between LCD with inspector : 35 cm
B: Criteria : Invisible
Note 4 : Note 5 also use for ViewSonic 8%ND filter Mura judgement.
Both Horizontal and Vertical are allowed
To Next Page
Loading...
Need help?
General