Need help?Do you have a question about the NEC MultiSync LCD3210 and is the answer not in the manual?
General| I/O ports | 1 x D-sub 15 pin in/out 5 x BNC 1 x Cinch out 2 x Cinch in |
|---|---|
| Pixel pitch | 0.511 x 0.511 mm |
| Power requirements | 100-120 V/220-240 V; 1.4 A/0.6 A |
| Vertical scan range | 58 - 85 Hz |
| Horizontal scan range | 31.5 - 91.1 kHz |
| Headphone connectivity | 3.5 mm |
| Operating relative humidity (H-H) | 20 - 80 % |
| Response time | 18 ms |
| Display diagonal | 32 \ |
| Display brightness | 500 cd/m² |
| Display resolution | 1366 x 768 pixels |
| Display technology | LCD |
| Native aspect ratio | 16:9 |
| Viewable size diagonal | 800 mm |
| Contrast ratio (typical) | 600:1 |
| Display number of colors | 16.78 million colors |
| Operating temperature (T-T) | 5 - 40 °C |
| Certification | CE; TÜV GS; C-tick; FCC Class B; UL/C-UL or CSA; CCC; PSB; VCCI; Ro |
| RS-232 ports | 1 |
| Product color | Silver |
| Panel mounting interface | 600 x 200 mm |
| Power consumption (typical) | 110 W |
| RMS rated power | 14 W |
| Number of speakers | 2 |
Weight and Dimensions| Depth (with stand) | 200 mm |
|---|---|
| Width (with stand) | 789 mm |
| Height (with stand) | 510.3 mm |
| Weight (with stand) | 16400 g |
| Depth (without stand) | 140 mm |
| Height (without stand) | 479 mm |
| Weight (without stand) | 15200 g |
Compliance information for radio and television interference.
Guidelines for safe setup and usage of the monitor.
Methods for attaching accessories in upright and face-down positions.
Securing the monitor and covering the main power switch.
Steps for determining installation location, installing batteries, and connecting power.
Connecting external devices and the power cord, then powering on.
Detailed steps for connecting the monitor to a PC via analog RGB.
How to connect a computer with a DVI-D digital interface.
Explains the three methods to power the monitor on and off.
How to adjust Brightness, Contrast, Sharpness, and Black Level using OSM.
How to adjust Tint, Color, Color Control, Color Temperature, and Picture Reset.
How to connect the PC via RS-232C and interface parameters.
Details on command timing, operation commands, and read commands for PC control.
Solutions for no picture, power button failures, image persistence, and color problems.
Troubleshooting steps for image persistence, instability, color issues, and no sound.
Details of the product warranty, coverage, and exclusions.
To Next Page