The LCD monitor follows the VESA approved DPM Power Man-
agement function.
The power management function is an energy saving function that auto-
matically reduces the power consumption of the display when the keyboard
or the mouse has not been used for a fixed period of time.
The power management feature on your new display has been set
to the “ON” mode. This allows your display to enter a Power Saving
Mode when no signal is detected. This could potentially increase the
life and decrease the power consumption of the display.
To view a video source:
Use the input button to set [VIDEO].
Use the COLOR SYSTEM menu to set, [AUTO], [NTSC], [PAL],
[SECAM], [PAL60], [4.43NTSC] in according to your video
format.
Basic Operation -continued
Power Indicator
Status
Power ON Green
Power OFF Red
Power Standby Red On
when “SCHEDULE” is enabled Green Blinking
Power Standby Red , Green
Power Indicator
Diagnosis (Detecting failure) Red Blinking
*See trouble shooting of page 33
When Using Power Management Function
Selecting a Video Source
Picture Size
Picture Mode
Information OSM