108
LCD Menu
4-5-8. Setup Date
Displays the date when the projector was setup (starting date of the warranty period).
The setup date is configured by using DCC. Refer to “Digital Cinema Communicator for S2 Installation Manual” for details.
← Displays the date when the projector was set up (starting date of the warranty period).
4-5-9. Option Status
Displays the link status of the device mounted in slot on the projector. The device name is displayed in ( ) when the projector
is in standby or when connection to the device cannot be confirmed.
← Displays the link status of the device in slot.
• NP-90MS: NP-90MS02-4K
• <Vendor Name> IMB: Media block
• No Board: No device mounted
To Next Page
Loading...
