2
DLP Cinema Projector Installation and Adjustment NEC Display Solutions, Ltd. Manual (This document) describes the proce-
dures to install, adjust and maintain the projector (NC1700L), the chiller unit (NP-17CU01) and peripheral devices. For safe
and correct installation, adjustment and use of the projector, carefully read this document before installation.
Refer to the operation manuals of the applicable products for basic operation and remarks of the projector. This document
expects the readers who have basic knowledge about projector installation. After reading, please keep this document under
care of the company which installed or adjusted the projector.
The product name used in this manual
In this manual, the device name is written as listed below. If the function has difference by devices, the product name is written
in the text.
• NC1700L Projector
• NP-17CU01 Chiller unit
• NP-17AL01 Coolant
• NP-90MS02-4K Media block or IMB
• Digital Cinema Communicator for S2 DCC
Introduction
To Next Page
Loading...
Need help?
General
