73
Setting Up Your Projector and Chiller Unit
2-8-2. Connecting the Control Cable
To monitor the state of the chiller unit and control ON/OFF of the unit from the projector, connect the control cable.
Connect the chiller unit control port (RJ-45) on the projector and the connector for communica-
tion line (RJ-45) on the chiller unit with the control cable supplied as an accessory.
GP I/O3DRS-232
USB
REMOTE
LAN
Chiller unit control port (RJ-45)
Connector for
communication
line (RJ-45)
Control cable
To Next Page
Loading...
