NEC NEAX 2000 IPS - LOGIN OPERATION (Dterm IP Only); LOGOUT OPERATION (Dterm IP Only)

7
LOGIN OPERATION (Dterm IP only)
(1) Automatic Login Mode (Authentication by MAC Address)
• When starting up the Dterm IP, the LCD
displays the login screen.
• Enter the Station Number of the Dterm IP following “LOGIN:”
• Press the Set soft key.
• Press the OK soft key. The time and date appear on the LCD.
Note:
After the first registration, Login operation is not required.
(2) Protected Login Mode
•
When starting up the Dterm IP, the LCD
displays the login screen.
• Enter the Station Number of the Dterm IP following “LOGIN:”
• Press the Set soft key.
• Enter the password for initial setup following “PASSWD:”
• Press the OK soft key. The time and date appear on the LCD.
LOGOUT OPERATION (Dterm IP only)
• Go off-hook or press the Speaker Key. Receive Dial Tone.
• Dial the Logout Feature Access Code or press the Logout
Feature Access Key or Logout Soft Key. Receive Service Set
Tone.
• The LCD displays the login screen.
LOGIN:
PASSWD:
CANCEL BK SET OK
LOGIN:
PASSWD:
CANCEL BK SET OK