8
TERMINAL SETUP WITH THE FEATURE KEY
Microphone On/Off
The MIC lamp shows the status of the built-in microphone.
To change microphone status:
• Press Soft Key associated with the MIC Display or press
Feature and 1.
To select ringer tone
The Dterm Series i has 14 ringer tones that you
can select.
• Press Feature and 3. The LCD displays the selected tone
number (n=1 ~ 14).
To adjust ringer tone
NOTE: Access to feature is based on data assignment.
• Press Feature and 0. Ringer activates.
• Press 3. The LCD displays the selected
tone number (n=1~14).
• Press 3. Next tone is selected.
To Next Page
Loading...
