18
CALL BACK (STATION)
• Lift handset or press Speaker.
• Dial desired station number and receive busy tone or ring back
tone.
• Press Call Back or dial 2 and receive service set tone.
• Restore handset.
• When busy station becomes idle or the station that did not
answer initiates or answers a call or accesses a feature and
then becomes idle, the setting station is alerted by ring and
flashing LED.
TO ANSWER A CAMPED-ON CALL
• While engaged in a call, receive the
camp-on indication (one short tone burst).
Answer LED flashes.
• Press Answer. Call in progress is placed
on hold.
• Connection to camped-on call is established.
• Press Answer to return to original call. Camped-on call is
placed on hold.
• Repeated depression of the Answer button allows you to
alternate between calls. Display indicates connected station or
trunk at any given time.
TO SET CAMP-ON (TRANSFER METHOD)
• With call in progress, ask party to hold. Depress Transfer
button, feature dial tone is heard.
• Dial desired station number and receive busy tone.
• Dial 4 and receive service set tone. Camp-on tone (2 tone
bursts) is sent to busy station.
• Restore handset.
To Next Page
Loading...
