10
TO ORIGINATE A CALL USING ONE-TOUCH BUTTONS
NOTE: With DTP-32D
• Press desired Speed Call button, or press Speaker and Speed
Call.
To program:
NOTE: (Available only on Dterm stations with speed calling
keys.)
• Press Conf button. Conf flashes
• Press desired One-Touch button, Speaker
button LED lights steady.
• Enter desired station number, feature
code or outside access code and telephone number. Display
indicates digits dialed.
• Press Conf again to save the number.
To verify:
• Press Conf button.
• Press desired One Touch button.
• Display indicates digits programmed.
NOTE: When a station number is programmed on a one touch
button, the associated LED Light will light when that station is
in use. (Available for 32D terminals only).
AUTOMATIC IDLE RETURN
• Press Speaker key. Receive dial tone.
• Dial desired number.
• When called party answers, converse.
• When called party hangs up, your D
term
automatically returns to
idle.
-- OR --
• Press One Touch key.
To Next Page
Loading...
