23
CALL FORWARDING-ALL CALLS
To Set:
• Press Speaker. Receive dial tone.
• Press FD-A or dial Call Forwarding
access code. Receive special dial tone.
• Dial destination station or external telephone number. Receive
service set tone.
• FWD LED lights (at your station if FD-A key was used).
• Press Speaker. Call Forwarding for all calls is set.
To verify (with 16 or 32-button Dterm):
• Press Speaker. Receive extension dial
tone.
• Press FD-A or dial Call Forward-All
access code.
• Display indicates the station number calls are forwarded to.
NOTE: If recipient station is a 16- or 32-button Dterm, LCD displays:
To cancel:
• Press Speaker. Receive dial tone. Press
FD-A plus * or dial Call Forwarding cancel
code. Receive service set tone. LED
goes out at your station (or the Dterm of
the sub line station).
• Press Speaker.
To Next Page
Loading...
