NEC NEAX 2000 IPS - Dial by Name Using System Speed Dialing; Dial by Name Using Station Speed Dialing

14
DIAL BY NAME USING SYSTEM SPEED DIALING
To initiate:
• Press the SYS soft key.
• Enter up to the first four characters of a name using the
keypad.
• Press the UP or DOWN key to start the search.
• The name and the number are shown on the LCD. If more than
one name matches the letters entered, scroll through the
matches with the UP or DOWN soft key.
• If no matches are founds, the first System Speed Dial buffer
will be displayed.
• Press the Speaker key, or selecting a Line/Trunk key to dial
the selected number.
DIAL BY NAME USING STATION SPEED DIALING
To initiate:
• Press the DIRECTORY key .
• Enter up to the first four characters of a name using the
keypad.
• Press the UP or DOWN key to start the search.
• The name and the number are shown on the LCD. If more than
one name matches the letters entered, scroll through the
matches with the UP or DOWN soft key.
• If no matches are founds, the first System Speed Dial buffer
will be displayed.
• Press the Speaker key, or selecting a Line/Trunk key to dial
the selected number.
• Press HOLD to exit Directory mode if required.