15
TO SAVE A NAME & NUMBER TO STATION SPEED DIALING
To register name & number:
• Press the DIRECTORY key
• Press the UP or DOWN key to select buffer to be programmed
• Press the FEATURE Key
• Using the key pad enter the name
• Press the FEATURE Key
• Using the key pad enter the number
NOTE: When entering an outside number you must include the
Trunk Access Code (i.e., 9) followed by area code and number.
TO PLACE A CALL ON HOLD
• Press Hold. Held line wink flashes.
NOTE: If held line appears on other
Dterm stations, the associated LED flashes red slowly.
To retrieve:
• Lift handset or press Speaker.
• Press held line. Use handset to converse.
NOTE: Any station with this line appearance can retrieve the
call.
If unanswered
• After preprogrammed time, Automatic Recall is initiated.
• Visual and audible signal (rapid flash and ring burst) is sent to
station that placed call on hold.
To Next Page
Loading...
