NEC NEAX 2000 IPS - Manual Intercom; Dial Intercom

13
MANUAL INTERCOM
To initiate:
• Lift handset or press Speaker, press
MICM, ring back tone is heard.
• Each press of MICM key sends tone bursts.
To answer
• MICM key flashes, indicating an incoming
call. Ring tone may also be heard.
• Press MICM.
• Lift handset or press Speaker, LED lights solid green.
• If called station is engaged in a non-intercom call, the station
may press MICM after placing original caller on hold (with Hold
key).
DIAL INTERCOM
To initiate:
• Lift handset or press Speaker key.
• Press DICM key.
• Dial desired intercom station number (0-9). Tone burst is sent.
(Press 1 to change to ring tone signal.
To answer
• DICM LED flashes, indicating an incoming intercom call. Tone
burst or ring tone is heard.
• Press DICM.
• Lift handset or press Speaker. LCD shows solid green.