CHAPTER 3 ND-45383 (E)
Page 58
Revision CD 1.0
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
Note 2: Switch setting when specifying baud rate of data transmission *
SW70-1
64 Kbps : ON
48/56 Kbps : OFF
*This switch setting must agree with the switch setting on the associated PA-DAIC card.
Note 3: Switch setting for 12 Multi Frame/24 Multi Frame Format
SW70-2
12 Multi Frame Format (D4) : ON
24 Multi Frame Format (ESF) : OFF
Note 4: Switch setting of m-bit (4 Kbps) data link system of 24 Multi Frame Format **
SW70-3
BOS (Bit Oriented Signals) System : ON
MOS (Message Oriented Signals) System : OFF
*This switch setting is valid only when SW70-2 has been set to OFF. When SW70-2 has been set to ON,
SW70-3 must be set to OFF.
SYMBOL CIRCUIT CARD
DRE PZ-CC94/PZ-23ELCK
To Next Page
Loading...
