To Next Page

To Previous Page

10. TOOLS

3. Make settings for each item as required.

ENABLE �� Select to enable or disable the event�

DAY �� Select days of the week for the program timer� To execute the program from Monday to Friday, select [MON-

FRI]�

To execute the program in everyday basis, select [EVERY DAY]�

TIME �� Set the time to execute the program� Enter time in 24-hour notation�

FUNCTION �� Select a function to be executed� When [POWER] is selected, you can set powering ON/OFF at [ADVANCED

SETTINGS], when [SOURCE] is selected, you can set video signal at [ADVANCED SETTINGS] and when [ECO]

is selected, you can set [OFF]/[AUTO ECO]/[NORMAL]/[ECO] for ECO mode at [ADVANCED SETTINGS]�

USB/B terminal is not available as the input terminal of the Program Timer�

ADVANCED SETTINGS

�� Select power on/off, a type of video source, or ECO MODE for the selected item in [FUNCTION]�

REPEAT �� Place a check mark to repeat the program continuing basis� To use the program this week only, clear the

check mark�

4. Focus on [OK] and press the ENTER button.

This will complete the settings.

You will be returned to the [PROGRAM LIST] screen.

5. Focus on [BACK] and press the ENTER button.

You will be returned to the [PROGRAM TIMER] screen.

6. Focus on [OK] and press the ENTER button.

You will be returned to the [TOOLS] screen.

NOTE:

• Upto30differenttimersettingscanbeprogrammed.

• Oncetheprogramnotmarkedwithacheckin[REPEAT]hasbeenexecuted,thecheckmarkinthe[ACTIVE]checkboxwillbe

clearedautomaticallyandtheprogramwillbedisabled.

• Ifseveralprogramsaresetatthesametime,theseprogramsareexecutedinorderoftheprogramlistnumber.

• Theon-timesettingwillnotbeexecutedwhilethecoolingfansarerunningoranerrorisoccurring.

• Iftheoff-timesettingisexpiredundertheconditioninwhichthepoweroffisnotpossible,theoff-timersettingwillnotbeexecuted

until the power off becomes possible.

• Programsnotmarkedwithacheckmarkin[ACTIVE]ofthe[EDIT]screenwillnotbeexecutedevenifENABLEfortheProgram

Timer is not activated.

• Whentheprojectoristurnedonbyusingtheprogramtimerandifyouwanttoturnofftheprojector,settheoff-timeordoit

manuallysoasnottoleavetheprojectoronforalongperiodoftime.

NEC NP-UM352W User Manual

Other manuals for NEC NP-UM352W