NEC P502HL - Light Mode

51
4. Using On-Screen Menu
UsingtheWallColorCorrection[WALLCOLOR]
Thisfunctionallowsforquickadaptivecolorcorrectioninapplicationswherethescreenmaterialisnotwhite.
[LIGHTMODE]
Adjustingtheenergysavingssettingsandthebrightnessofeachprojectorinmulti-screenprojection.Forenergysav-
ingssettings,seepage28“4ChangingEcoMode/CheckingEnergy-SavingEffect”.
ECOMODE OFF Thelightmoduleluminance(brightness)willbeatthesetupbrightnessfor[ADJUST].
ECO1 Bycontrollingthebrightnessandfanspeedaccordingtotheselectedsetting,energycan
besavedandmotionnoiseandthepowerconsumptioncanbelowered.
Canbeselectedwhen[CONSTANTBRIGHTNESS]modeissetto[OFF].
ECO2
ADJUST Brightnesscanbeadjustedin1%incrementsfrom16to100%.
Whenseveralprojectorsareusedformulti-screenprojection,thebrightnesscanbead-
justedindividuallyoneachprojector.
Theadjustmentisvalidwhen[ECOMODE]issetto[OFF]and[CONSTANTBRIGHT-
NESS]issetto[OFF].
CONSTANT
BRIGHTNESS
OFF [CONSTANTBRIGHTNESS]modewillbecanceled.
ON Maintains50%brightnessofthefactorydefaultsetting.
NOTE:
• [CONSTANTBRIGHTNESS]modeisafunctionusedtomaintainthebrightnessataconstant
level.Colorwillnotbexed.
TIP:
• Brightnessnormallydecreaseswithuse,butbyselecting[CONSTANTBRIGHTNESS]mode,theprojectorautomaticallyadjust
theoutputbasedontheprojectorusedtime,therebymaintainingaconstantbrightnessthroughoutthelifeofthelightmodule.
 However,ifoutputisalreadyatitsmaximum,brightnesswilldecreasewithuse.