NEC P554U - Menu Descriptions & Functions [SOURCE]

45
4. Using the Viewer
❷ Projecting images stored in a USB memory device
ThissectionexplainsthebasicoperationoftheViewer.
TheexplanationprovidestheoperationalprocedurewhentheViewertoolbar(→page49)issettothefactorydefault.
-StartingtheViewer ......................................................................below
-RemovingtheUSBmemoryfromtheprojector ...................... page47
-ExitingtheViewer .................................................................... page47
Preparation:BeforestartingtheViewer,storeimagestotheUSBmemoryusingyourcomputer.
Starting the Viewer
1. Turn on the projector. (→ page 12)
2. Insert the USB memory into the USB port of the projec-
tor.
• DonotremovetheUSBmemoryfromtheprojectorwhile
it’s LED flashes. Doing so may corrupt the data.
3. PresstheSOURCEbuttonontheprojectorcabinet.
The Viewer start screen will be displayed.
• PresstheAPPSbuttonontheremotecontrol.