NEC PC-8201A - Page 109

Chapter 6
Function Keys
f.l/LOAD
SYNTAX:
LOAD " { File Name) (,R)
FUNCTION:
Used to load a program file stored in the RAM into the memory of
the PC-8201.
DESCRIPTION:
Programs are loaded into the memory from RAM by pressing the f.1
Function Key and entering < file name > in response to the prompt
“Load from". If the "R" option is specified, the program will be
executed immediately after loading.
After a LOAD command is executed, the word “WAIT" will blink
until the word "Ok" is displayed. Using the LOAD command will
overlay whatever was loaded previously into the memory.
Once a program has been loaded into the memory, it is available for
modification or for execution.
6-10