NEC PC-8201A - Page 177

Oiapter 8
f. 10/BYE
FUNCTION:
This TERM subcommand withdraws the PC-8201 from the TERM
mode and returns it to the TELCOM mode.
DESCRIPTION:
If the f. 10 Function Key (Qj^and f.5) is input while the PC-8201
is in the TERM mode, the data transmission through the RS-232C
circuit is stopped and the PC-8201 returns to the TELCOM
mode, The BYE command can be used during either the UPLOAD
or the DOWNLOAD commands.
_K The BYE command leaves the TERM mode and returns
l=^> only to the TELCOM mode. To get from the TERM
mode back to the MENU mode, you will have to press
the f.10 Function Key again. This inputs the MENU
command in the TELCOM mode, then returning to the
MENU mode.
8-22